In-Situ Chemical Oxidation
Credit: 6 PDH
Subject Matter Expert: Mark Knarr, P.E., CDT, CEM, LEED AP BD+C, PMP, CCEA, GPCP
| Add to Cart Purchase using credit card or debit card | Or | Enroll now Enroll for free using my NoonPi Unlimited Plan |
In In-Situ Chemical Oxidation, you'll learn ...
- The four primary oxidants used in in-situ chemical oxidation (ISCO)
- ISCO site requirements, operational issues, and regulatory constraints
- ISCO limitations, interferences, and impacts
Overview
Preview a portion of this course before purchasing it.
Credit: 6 PDH
Length: 60 pages
EPA confirmed nearly 3,000 new releases from underground storage tanks (USTs) during fiscal year 2010, bringing the cumulative total to 491,572 releases since 1984. Although progress has been made in cleaning these sites, over 96,000 of them still require remedial action. (Source: Semiannual Report of UST Performance Measures, Mid Fiscal Year 2010, 3/31/2010.). These UST leaks pose a grave threat to human health and the environment by contaminating groundwater and soil.
As an alternative to traditional pump-and-treat or soil excavation, in-situ chemical oxidation (ISCO) is an emerging remediation technology that delivers oxidants (a.k.a. oxidizers) into the subsurface, which chemically react with the target contaminant via oxidation-reduction ("redox"). These redox reactions convert the contaminants into carbon dioxide, water, and other products, ultimately reducing concentrations of the target contaminant in soil and groundwater.
Treatment systems that use ISCO rely upon wells spaced at specific intervals to inject the oxidant, extract vapor or groundwater, and monitor various performance parameters. Despite the potential for its success, one must carefully consider both the site conditions and contaminant properties before implementing ISCO.
This course is intended for environmental engineers who wish to expand their knowledge of alternative methods of site remediation.
Specific Knowledge or Skill Obtained
This course teaches the following specific knowledge and skills:
- Four primary ISCO oxidants: permanganate, Fenton's reagent, ozone, and persulfate
- Bench- and pilot-scale studies: objectives and general guidelines
- ISCO applicability based on injection point, as well as contaminant and subsurface characteristics
- Site requirements, operational issues, and regulatory constraints
- Field-scale implementation: oxidant delivery, pre- and post-treatment methods, site monitoring, and safety concerns
- ISCO limitations, interferences, and impacts
Certificate of Completion
You will be able to immediately print a certificate of completion after passing a multiple-choice quiz consisting of 35 questions. PDH credits are not awarded until the course is completed and quiz is passed.
| This course is applicable to professional engineers in: | ||
| Alabama (P.E.) | Alaska (P.E.) | Arkansas (P.E.) |
| Delaware (P.E.) | District of Columbia (P.E.) | Florida (P.E. Area of Practice) |
| Georgia (P.E.) | Idaho (P.E.) | Illinois (P.E.) |
| Illinois (S.E.) | Indiana (P.E.) | Iowa (P.E.) |
| Kansas (P.E.) | Kentucky (P.E.) | Louisiana (P.E.) |
| Maine (P.E.) | Maryland (P.E.) | Michigan (P.E.) |
| Minnesota (P.E.) | Mississippi (P.E.) | Missouri (P.E.) |
| Montana (P.E.) | Nebraska (P.E.) | Nevada (P.E.) |
| New Hampshire (P.E.) | New Jersey (P.E.) | New Mexico (P.E.) |
| New York (P.E.) | North Carolina (P.E.) | North Dakota (P.E.) |
| Ohio (P.E. Self-Paced) | Oklahoma (P.E.) | Oregon (P.E.) |
| Pennsylvania (P.E.) | South Carolina (P.E.) | South Dakota (P.E.) |
| Tennessee (P.E.) | Texas (P.E.) | Utah (P.E.) |
| Vermont (P.E.) | Virginia (P.E.) | West Virginia (P.E.) |
| Wisconsin (P.E.) | Wyoming (P.E.) | |
Preview a portion of this course before purchasing it.
Credit: 6 PDH
Length: 60 pages
| Add to Cart Purchase using credit card or debit card | Or | Enroll now Enroll for free using my NoonPi Unlimited Plan |
1431 Graham Drive, Suite 265
support@noonpi.com
