Heat Recovery Ventilation in HVAC Systems (Ohio T&M)

Course Number: HV-5022TM
Credit: 5 PDH
Subject Matter Expert: A. Bhatia, Mechanical Engineer
Type: Timed and Monitored - designed for Ohio-licensed engineers.
Price: $149.75 or enroll free with your NoonPi Unlimited Plan
Add to Cart

Purchase using credit card or debit card
Or Enroll now

Enroll for free using my NoonPi Unlimited Plan
3 reviews  3 reviews   
Overview
This course is specifically designed for Ohio-licensed engineers to qualify as a "timed and monitored" online course. The course contains an automatic timer that prevents the user from accessing the quiz and earning a certificate of completion until the minimum amount of study time has been met. This achieves the Ohio Board's intent that an online course should be "paced" by the provider. For more information, please see the Ohio state requirements. This course may also be accepted in other states (see the "Board Acceptance" tab above). However, if you are not licensed in Ohio, it is suggested that you purchase the self-paced version of the course.

In Heat Recovery Ventilation in HVAC Systems, you'll learn ...

  • Fundamental principles of heat and energy recovery systems
  • The basic principles of various air-to-air energy recovery devices
  • Typical applications, calculations, advantages, and limitations
  • Codes and standards pertaining to energy recovery

Overview

PDHengineer Course Preview

To meet the Ohio Board's intent that online courses be "paced" by the provider, a timer will be used to record your study time. You will be unable to access the quiz until the required study time of 250 minutes has been met.

Credit: 5 PDH

Length: 97 pages

Energy recovery ventilation is the process of exchanging the energy contained in a normally exhausted building or space air and using it to treat or "precondition" the incoming outdoor ventilation air in residential and commercial heating, ventilating, and air conditioning (HVAC) systems.

During the warmer seasons, the system pre-cools and dehumidifies, whereas during the cooler seasons, it humidifies and pre-heats.

The benefit of using energy recovery is the ability to meet the ASHRAE ventilation and energy standards while improving indoor air quality and reducing total HVAC equipment capacity.

High-performance Heat Recovery Ventilators (HRV) and Energy Recovery Ventilators (ERV) ensure a continuous ventilation supply and a comfortable and healthy indoor environment.

This technology not only demonstrates an effective means of lowering energy costs and heating and cooling loads, but it has also enabled HVAC equipment to be scaled down.

These energy recovery systems have attracted a lot of interest for industrial, office, and household applications.

Popular methods include air-to-air systems, in which heat recovered from the exhaust air stream is used to preheat incoming fresh air, and heat pumps, in which heat from the exhaust air stream is used to preheat the building's hot water or space heating system.

This course outlines the fundamental principles of heat and energy recovery systems.

This includes understanding the basic principles of various air-to-air energy recovery devices, as well as typical applications, calculations, advantages, and limitations.

Specific Knowledge or Skill Obtained

This course teaches the following specific knowledge and skills:

  • Understand the basic principles pertaining to building ventilation design with emphasis on the following:
  • The concept of building ventilation and the benefits of air-to-air energy recovery systems
  • Various energy-recovery technologies such as plate type exchangers, enthalpy wheels, heat pipes, and run-around loops
  • Alternatives to air-to-air recovery techniques such as economizers, demand control ventilation, and the use of exhaust air heat pumps
  • Advantages, applications, and limitations of various air-to-air energy recovery technologies
  • How to calculate the minimum ventilation rates using ASHRAE 62.1 standards
  • Impact of energy codes such as ASHRAE 90.1 standards on the selection of ERVs
  • Psychrometric analysis and energy saving calculations for heat and energy recovery systems

Certificate of Completion

You will be able to immediately print a certificate of completion after passing a multiple-choice quiz consisting of 30 questions. PDH credits are not awarded until the course is completed and quiz is passed.

Board Acceptance
This course is applicable to professional engineers in:
Alabama (P.E.) Alaska (P.E.) Arkansas (P.E.)
Delaware (P.E.) District of Columbia (P.E.) Florida (P.E. Area of Practice)
Georgia (P.E.) Idaho (P.E.) Illinois (P.E.)
Illinois (S.E.) Indiana (P.E.) Iowa (P.E.)
Kansas (P.E.) Kentucky (P.E.) Louisiana (P.E.)
Maine (P.E.) Maryland (P.E.) Michigan (P.E.)
Minnesota (P.E.) Mississippi (P.E.) Missouri (P.E.)
Montana (P.E.) Nebraska (P.E.) Nevada (P.E.)
New Hampshire (P.E.) New Jersey (P.E.) New Mexico (P.E.)
New York (P.E.) North Carolina (P.E.) North Dakota (P.E.)
Ohio (P.E. Timed & Monitored) Oklahoma (P.E.) Oregon (P.E.)
Pennsylvania (P.E.) South Carolina (P.E.) South Dakota (P.E.)
Tennessee (P.E.) Texas (P.E.) Utah (P.E.)
Vermont (P.E.) Virginia (P.E.) West Virginia (P.E.)
Wisconsin (P.E.) Wyoming (P.E.)
Reviews (3)
More Details

PDHengineer Course Preview

To meet the Ohio Board's intent that online courses be "paced" by the provider, a timer will be used to record your study time. You will be unable to access the quiz until the required study time of 250 minutes has been met.

Credit: 5 PDH

Length: 97 pages

Add to Cart

Purchase using credit card or debit card
Or Enroll now

Enroll for free using my NoonPi Unlimited Plan

Terms of Use: By using our website, you consent to our Terms of Use and use of cookies in accordance with our Privacy Policy. Accept