Battery Room Ventilation and Safety (Ohio T&M)

Course Number: HV-4020TM
Credit: 4 PDH
Subject Matter Expert: A. Bhatia, Mechanical Engineer
Type: Timed and Monitored - designed for Ohio-licensed engineers.
Price: $119.80 or enroll free with your NoonPi Unlimited Plan
Add to Cart

Purchase using credit card or debit card
Or Enroll now

Enroll for free using my NoonPi Unlimited Plan
101 reviews  101 reviews   
Overview
This course is specifically designed for Ohio-licensed engineers to qualify as a "timed and monitored" online course. The course contains an automatic timer that prevents the user from accessing the quiz and earning a certificate of completion until the minimum amount of study time has been met. This achieves the Ohio Board's intent that an online course should be "paced" by the provider. For more information, please see the Ohio state requirements. This course may also be accepted in other states (see the "Board Acceptance" tab above). However, if you are not licensed in Ohio, it is suggested that you purchase the self-paced version of the course.

In Battery Room Ventilation and Safety, you'll learn ...

  • Components and operating mechanism of a lead-acid battery
  • How lead-acid batteries can create an explosive atmosphere in an enclosed space
  • Ventilation requirements for lead-acid batteries
  • Battery room design criteria

Overview

PDHengineer Course Preview

To meet the Ohio Board's intent that online courses be "paced" by the provider, a timer will be used to record your study time. You will be unable to access the quiz until the required study time of 200 minutes has been met.

Credit: 4 PDH

Length: 45 pages

It is common knowledge that lead-acid batteries release hydrogen gas that can be potentially explosive. Battery rooms must be adequately ventilated to prohibit the build-up of hydrogen gas. During normal operations, off gassing of the batteries is relatively small. However, the concern is elevated during times of heavy recharge of the batteries, which occurs immediately following a rapid and deep discharge.

Often HVAC designers underestimate the worst case for dangerous hydrogen accumulation, and display reassuring calculations proving that no danger really exists. But dismissing such a critical safety issue is not a prudent or responsible way to deal with it. Instead, we should be prepared to face the likely possibility of hydrogen build up, clearly identify the conditions when the risk is highest, and design systems that protect against explosive levels in a fail-safe way.

This 4-hour course describes the hazards associated with batteries and highlights those safety features that must be taken into consideration when designing, constructing and fitting out a battery room. The course is for reference only. Anyone involved in the design of a battery room should rely on the experience of a professional engineer who is well versed in applicable codes, standards and regulations for the installation site. Advice on specific ventilation rates required must be sought from the battery suppliers.

Specific Knowledge or Skill Obtained

This course teaches the following specific knowledge and skills:

  • The construction, function and operation of a Lead Acid battery
  • Battery capacity i.e. 'Amp Hour Rate' or 'Reserve Capacity' voltage
  • The differences between vented lead acid and sealed VRLA batteries
  • The requirements of IEEE, OSHA, NEC, UBC and DOT for battery room installations
  • Ventilation requirements for battery rooms to account for hydrogen and fume extraction
  • Battery maintenance, testing and charging practices
  • The dangers and the Health and Safety precautions associated with the lead acid battery, its service, use, and component materials

Certificate of Completion

You will be able to immediately print a certificate of completion after passing a multiple-choice quiz consisting of 24 questions. PDH credits are not awarded until the course is completed and quiz is passed.

Board Acceptance
This course is applicable to professional engineers in:
Alabama (P.E.) Alaska (P.E.) Arkansas (P.E.)
Delaware (P.E.) District of Columbia (P.E.) Florida (P.E. Area of Practice)
Georgia (P.E.) Idaho (P.E.) Illinois (P.E.)
Illinois (S.E.) Indiana (P.E.) Iowa (P.E.)
Kansas (P.E.) Kentucky (P.E.) Louisiana (P.E.)
Maine (P.E.) Maryland (P.E.) Michigan (P.E.)
Minnesota (P.E.) Mississippi (P.E.) Missouri (P.E.)
Montana (P.E.) Nebraska (P.E.) Nevada (P.E.)
New Hampshire (P.E.) New Jersey (P.E.) New Mexico (P.E.)
New York (P.E.) North Carolina (P.E.) North Dakota (P.E.)
Ohio (P.E. Timed & Monitored) Oklahoma (P.E.) Oregon (P.E.)
Pennsylvania (P.E.) South Carolina (P.E.) South Dakota (P.E.)
Tennessee (P.E.) Texas (P.E.) Utah (P.E.)
Vermont (P.E.) Virginia (P.E.) West Virginia (P.E.)
Wisconsin (P.E.) Wyoming (P.E.)
Reviews (101)
More Details

PDHengineer Course Preview

To meet the Ohio Board's intent that online courses be "paced" by the provider, a timer will be used to record your study time. You will be unable to access the quiz until the required study time of 200 minutes has been met.

Credit: 4 PDH

Length: 45 pages

Add to Cart

Purchase using credit card or debit card
Or Enroll now

Enroll for free using my NoonPi Unlimited Plan

Terms of Use: By using our website, you consent to our Terms of Use and use of cookies in accordance with our Privacy Policy. Accept