Horizontal Curve Safety (Ohio T&M)

Course Number: T-3019TM
Credit: 3 PDH
Subject Matter Expert: Mark Knarr, P.E., CDT, CEM, LEED AP BD+C, PMP, CCEA, GPCP
Type: Timed and Monitored - designed for Ohio-licensed engineers.
Price: $89.85 or enroll free with your NoonPi Unlimited Plan
Add to Cart

Purchase using credit card or debit card
Or Enroll now

Enroll for free using my NoonPi Unlimited Plan
9 reviews  9 reviews   
Overview
This course is specifically designed for Ohio-licensed engineers to qualify as a "timed and monitored" online course. The course contains an automatic timer that prevents the user from accessing the quiz and earning a certificate of completion until the minimum amount of study time has been met. This achieves the Ohio Board's intent that an online course should be "paced" by the provider. For more information, please see the Ohio state requirements. This course may also be accepted in other states (see the "Board Acceptance" tab above). However, if you are not licensed in Ohio, it is suggested that you purchase the self-paced version of the course.

In Horizontal Curve Safety , you'll learn ...

  • What are horizontal curve treatments and how they save lives
  • Basic treatments found in the MUTCD, as well as enhancements to the basic MUTCD devices
  • New and innovative horizontal curve treatments that are still considered experimental
  • Six (6) maintenance activities that are critical to retaining the effectiveness of horizontal curve treatments

Overview

PDHengineer Course Preview

To meet the Ohio Board's intent that online courses be "paced" by the provider, a timer will be used to record your study time. You will be unable to access the quiz until the required study time of 150 minutes has been met.

Credit: 3 PDH

Length: 52 pages

Horizontal curves are those that change the alignment or direction of the road (as opposed to vertical curves, which change the slope). More than 25% of fatal crashes are associated with a horizontal curve, and the vast majority of these crashes are roadway departures. A roadway departure crash is defined as a non-intersection crash which occurs after a vehicle crosses an edge line or a center line, or otherwise leaves the traveled way.

The average crash rate for horizontal curves is about three times that of other types of highway segments. About three-quarters of curve-related fatal crashes involve single vehicles leaving the roadway and striking trees, utility poles, rocks, or other fixed objects—or overturning.

Most roadway departure countermeasures are effective when applied specifically at horizontal curves. A focus on horizontal curves can prove to be a cost-effective approach to reducing roadway departure crashes. Many of these countermeasures are low-cost and can be installed at prioritized horizontal curves to address safety issues.

The purpose of this course is to provide practical information about low-cost treatments that can be applied at horizontal curves to address actual or potential safety problems. The target audience is civil and transportation engineers who are involved with roadway construction, repair, or maintenance.

Specific Knowledge or Skill Obtained

This course teaches the following specific knowledge and skills:

  • Basic treatments listed in the Manual on Uniform Traffic Control Devices (MUTCD) for horizontal curves
  • Devices that enhance the basic treatments
  • Other treatments used by State and local agencies that aren’t listed in the MUTCD
  • Rumble strips applied to centerlines, edge lines, shoulders, and transversely across the lane
  • Relatively low-cost treatments that require minor improvements to the roadway or shoulder
  • Innovative and experimental methods that have not been applied extensively
  • Simple, effective maintenance

Certificate of Completion

You will be able to immediately print a certificate of completion after passing a multiple-choice quiz consisting of 20 questions. PDH credits are not awarded until the course is completed and quiz is passed.

Board Acceptance
This course is applicable to professional engineers in:
Alabama (P.E.) Alaska (P.E.) Arkansas (P.E.)
Delaware (P.E.) District of Columbia (P.E.) Florida (P.E. Area of Practice)
Georgia (P.E.) Idaho (P.E.) Illinois (P.E.)
Illinois (S.E.) Indiana (P.E.) Iowa (P.E.)
Kansas (P.E.) Kentucky (P.E.) Louisiana (P.E.)
Maine (P.E.) Maryland (P.E.) Michigan (P.E.)
Minnesota (P.E.) Mississippi (P.E.) Missouri (P.E.)
Montana (P.E.) Nebraska (P.E.) Nevada (P.E.)
New Hampshire (P.E.) New Jersey (P.E.) New Mexico (P.E.)
New York (P.E.) North Carolina (P.E.) North Dakota (P.E.)
Ohio (P.E. Timed & Monitored) Oklahoma (P.E.) Oregon (P.E.)
Pennsylvania (P.E.) South Carolina (P.E.) South Dakota (P.E.)
Tennessee (P.E.) Texas (P.E.) Utah (P.E.)
Vermont (P.E.) Virginia (P.E.) West Virginia (P.E.)
Wisconsin (P.E.) Wyoming (P.E.)
Reviews (9)
More Details

PDHengineer Course Preview

To meet the Ohio Board's intent that online courses be "paced" by the provider, a timer will be used to record your study time. You will be unable to access the quiz until the required study time of 150 minutes has been met.

Credit: 3 PDH

Length: 52 pages

Add to Cart

Purchase using credit card or debit card
Or Enroll now

Enroll for free using my NoonPi Unlimited Plan

Terms of Use: By using our website, you consent to our Terms of Use and use of cookies in accordance with our Privacy Policy. Accept